Supported Devices
Currently, a growing set of Petkit devices is supported. Each device requires a separate implementation.
INFO
ESP32-based devices support firmware updates over the air (OTA). Ingenic/embedded Linux devices require physical serial access to install modified firmware.
Petkit Pura Max (ESP32)
Automatic self-cleaning litter box with odor control and K3 spray integration.
Supported:
- ✅ Auto and manual cleaning cycles
- ✅ Maintenance mode
- ✅ K3 odor spray (link/unlink, manual trigger)
- ✅ Litter weight, fill level, and usage monitoring
- ✅ N50 deodorizer filter tracking
- ✅ Do-not-disturb scheduling
- ✅ Kitten protection mode
- ✅ Error reporting
Petkit Fresh Element Solo (ESP32)
Automatic pet feeder with portion control and feeding schedules.
Supported:
- ✅ Manual feed trigger
- ✅ Feeding schedules
- ✅ Food level warning
- ✅ Desiccant tracking
- ✅ Feed sound, indicator light, and child lock
Petkit Fresh Element 3 (ESP32)
BETA
The integration of this device is currently in beta. Please report any issues you encounter on GitHub.
Automatic pet feeder with portion control and feeding schedules.
Supported:
- ✅ Manual feed trigger
- ✅ Feeding schedules
- ✅ Food level warning
- ✅ Desiccant tracking
- ✅ Child lock
- ✅ Feed sound prompt
Petkit Yumshare Dual (Ingenic / Embedded Linux)
WARNING
No OTA support. To enable local control, you need to open the device and connect via serial.
Automatic dual-hopper pet feeder with a built-in camera, microphone, and AI-based pet and eating detection. Each feeding can mix food from both hoppers independently.
Supported:
- ✅ Manual feed trigger with per-hopper amounts
- ✅ Feeding schedules with per-hopper amounts
- ✅ Per-hopper calibration factors
- ✅ Camera, microphone, night vision
- ✅ Motion, pet visit, and eating detection
- ✅ Volume control
- ✅ Desiccant tracking
- ✅ Pet recognition (discern)
- ✅ Bluetooth Proxy
Petkit Yumshare Solo (Ingenic / Embedded Linux)
WARNING
No OTA support. To enable local control, you need to open the device and connect via serial.
Automatic pet feeder with a built-in camera, motion detection, and AI-based pet and eating detection.
Supported:
- ✅ Manual feed trigger
- ✅ Feeding schedules
- ✅ Camera, microphone, night vision
- ✅ Snapshot capture
- ✅ Motion, pet visit, and eating detection
- ✅ Adjustable detection sensitivity
- ✅ Volume control
- ✅ Desiccant tracking
Petkit Purobot Crystal (Ingenic / Embedded Linux)
WARNING
No OTA support. To enable local control, you need to open the device and connect via serial.
Self-cleaning litter box for crystal litter with a built-in camera, deodorizing spray unit, and health monitoring features (urine pH detection, occult blood detection).
Supported:
- ✅ Automatic and manual cleaning cycles
- ✅ Deodorizing spray (auto, deep, manual)
- ✅ Lightning (UV) cleaning
- ✅ Litter leveling
- ✅ N60 deodorant crystal and cardboard tray tracking
- ✅ Kitten protection mode
- ✅ Camera, snapshots, and pet visit detection
- ✅ Health monitoring (urine pH, occult blood, loose stool recognition)
- ✅ Bluetooth Proxy
Petkit Eversweet Ultra (Ingenic / Embedded Linux)
WARNING
No OTA support. To enable local control, you need to open the device and connect via serial.
Smart water fountain with a built-in camera, automatic water change (drain & refill), heater, clean and waste water tanks, and a replaceable filter cube.
Supported:
- ✅ Fountain flow modes (off, continuous, interval, sensor)
- ✅ Heater with target temperature
- ✅ Automatic drain & refill / drain & flush cycles
- ✅ Deep clean and disinfect cycles
- ✅ Cube (filter) consumable tracking
- ✅ Camera, snapshots, and live stream
- ✅ Pet appearance and drinking detection with pet recognition (discern)
- ✅ Water tank monitoring with alerts
- ✅ Bluetooth Proxy
Bluetooth Devices
The following BLE devices are supported via a Bluetooth proxy (e.g. a Pura Max or any other WiFi device):